Specification
|
Specification
|
| Model |
GPS Trackers |
| Single size |
37*65.5*18.3mm |
| Package weightweight |
156g |
| Positioning mode |
GPS+BDS+LBS |
| Standby time |
15hours-5days |
| Place of Origin |
Shenzhen |
| Working temperature |
-20°to +55° |
| Support network |
2g/4g |
| Charging |
USB INTERFACE |
Features & Details
● Electric fence: Setting an area around locator.alarming immediately when the pet getting in or out the area. Put a electric fence name and set in or out the fence alarm.(The recommended range is 400-1km)
● Real time positioning: Record your dog in real time and you can clearly see your dog’s location
● Remote intercom voice calling dog: Support remote intercom ,convenient for calling pets and returning to your side in real time.
● Low battery alarm: If it is lower than15%.automatic alarm will be given to remind charging.
Z8-A Z8-B
Before use
1) Please prepare a Nano SIM card which supports 2G GSM and GPRS function. Do not support 3G and 4G currently. Choose the card like below:
1) Please scan the QR code and download the APP. Open the APP and registered for an account.
Getting Started
1) Take the silicone shell off. Insert card into the slot in correct direction. See the sign on the product.
Operating environment and maintenance
1. Do not operate the device in temperatures of 104°F and above.
2. Do not use the remote control when it is snowing, it may cause water ingress and damage the remote control.
3. Do not use this product in places with strong electromagnetic interference, which will seriously damage the performance of the product.
4. Avoid dropping the device on a hard surface or applying excessive pressure to it.
5. Do not use it in a corrosive environment, so as not to cause discoloration, deformation and other damage to the appearance of the product.
6. When not using this product, wipe the surface of the product clean, turn off the power, put it in the box, and put it in a cool and dry place.
7. The collar cannot be immersed in water for a long time.
8. If the remote control falls into the water, please take it out quickly and turn off the power, and then it can be used normally after drying the water.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and collar.
—Connect the equipment into an outlet on a circuit different from that to which the collar is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FAQ About Product
Question 1: Can multiple collars be connected simultaneously?
Answer 1: Yes, multiple collars can be connected. However, when operating the device, you can only choose to connect one or all collars. You cannot select only two or three collars. Collars that do not need to be connected must be cancel pairing. For example, if you select to connect four collars but only need to connect two, such as collar 2 and collar 4, you need to cancel pairing the others on the remote instead of selecting only collar 2 and collar 4 on the remote and leaving collar 1 and collar 3 turned on. If you do not cancel pairing collar 1 and collar 3 from the remote and only turn them off, the remote will issue an out-of-range warning, and the icons of collar 1 and collar 3 on the remote will flash because the signal of the turned-off collars cannot be detected.
Question 2: When the out-of-range sound and vibration are warning simultaneously, will manually operating the vibration and sound on the remote conflict with each other? Which one takes priority?
Answer 2: When out of range, the collar will emit sound first, and the remote will also beep. After 5 seconds,the collar will vibrate and beep at the same time. However, if you simultaneously press the vibration function on the remote at this time, the vibration function on the remote takes priority over the out-of-range warning function. If you stop pressing the remote, the out-of-range vibration and warning sound will continue to be emitted.
Question 3: Can the packaging be customized?
Answer 3: yes, customized Package:1pc/color box or bag, gift box
Question 4: What is your deliver Time?
Answer 4: Standard order:about 7-15 days after confirmed the deposit payment.
Custom order:about 10-20 days after confirmed the deposit payment.
Question 5: Sample Time
Answer 5: 1-7 working days after confirmation
Question 6: Can you work with OEM&ODM order?
Answer 6: yes, we are leading manufacturer with strong R&D ability
Question 7: Why Choose us?
Answer 7: High quality products with competitive price
Strong R&D ability, keep developing new designs
Support customized logo, box, design,etc
Professional freight forwarder, fast and good service