● Safe for Dog & Human: The anti barking device use upgrade ultrasonic technology to allow humans to hear slight sounds but not affected by the sound, but dogs will be sensitive to these ultrasonic waves and other family members or neighbors will not worry about being affected. It does not cause major punishment to the dog, it emits an ultrasound that only dogs can hear to get its attention, so sometimes it doesn’t work immediately like a shock collar, please be patient for 1 week to train it.
● USB Charging & IPX4 Weatherproof: The Dog Barking Control Device has IPX4 weatherproof, the shell is made of ABS material, which is not easy to fade. It can be easily hung on a tree, indoor , outdoor wall or fence to stop any dog barking. And it use USB charging, it can last at least a week on a single charge, no need to buy batteries frequently, saving you money.
● 4 Adjustable Sensitivity & Frequency: The Dog Barking Deterrent Device has 4 levels of sensitivity(15-50FT) and 4 levels of frequency (15KHZ-30KHZ). Different dogs may be sensitive to ultrasound in different frequency bands. Please turn the knob to test different frequency bands for best results. If you or your neighbor's dog barks too excitedly, put it in the right spot and you'll have a quiet resting environment.
● Easy to Use: The anti barking device has a built-in pickup that can detect the dog's barking within 50 feet and automatically emits ultrasonic that the dog can hear. Once the dog stops barking, the device automatically stops. Compared with the traditional dog training device, it completely free your hands. Automatic and effective training your dog to stop excessive and noisy barking.
| Specification | |
| Product name | Outdoor bark control |
| Power | USB |
| Input Voltage | 3.7V |
| Input current | 40mAh |
| Battery | 3.7V 1500mAh |
| Waterproof | IP4 |
| Sensor | Sound detection |
| Sensor distance | Up to 50ft |
| Ultrasonic frequency | 15KHZ-30KHZ |
Charging Collar: To charge the device, plug the black USB charging cable provided with the device into the bottom of the device and connect to a laptop, PC, or <2 amp power source. The device can be charged in three hours and work continuously for 30 days. While the device is charging, the digital display will show the battery level and flash until it is fully charged. When the product is fully charged, the digital display will show "4". Before turning on the device, unplug the USB charger.
To turn device ON press the “POWER” button down for 3 seconds and it will beep once with the digital display flashing a green number which will then disappear. To Turn device OFF press the “POWER” button down for 3 seconds and it will beep twice and turn itself off.
● The digital display shows the levels of sensitivity and Frequency.
● You can choose to adjust the sensitivity from 1-4 by constantly press the sensitivity button. Level 1 is the least sensitivity and level 4 is the most sensitivity.
● You can choose to adjust the ultrasonic Frequency from 1-4 by constantly press the Frequency cons button.
Level 1- ultrasonic Frequency 15KHZ, digital display 1 with 6 seconds
Level 2- ultrasonic Frequency 20KHZ, digital display 2 with 6 seconds
Level 3- ultrasonic Frequency 30KHZ, digital display 3 with 6 seconds
Level 4- ultrasonic Frequency will emit for 1 -3 level 3 different ultrasonic frequency sounds with 6 seconds , digital display 4.
1. Please charge the device fully by USB before first time.
2. Please DO NOT install the device in water.
3. The product CAN NOT work while charging.
4. If the product is not use for a long time (for example: more than one mouth), before using it, Please charge it fully by USB. And if it doesn’t work after fully charged, please Restart.